DX Square plate equipment roll forming machine

products show

Welcome to the dinxin company!

Manual Un-coiler	◊ Max Capacity: 5000kgs ◊ Inner diameter of coil: 400-600mm ◊ Manual with brake
Leveling Device	◊ Ensure the material level and straight ◊ The width can be adjusted
Main Forming System	◊ Width & Height & Thickness of sheet: According to Drawings ◊ Material: GI sheet coil or Colored sheet coil ◊ Motor Power: 5.5 kw forming system ◊ Roller material:Cr12 ◊ Surface of Roller: Heat treatment HRC58-60 ◊ Measuring accuracy: +/- 0.5 mm/M ◊ Safety Hood: Cage ◊Arch middle plate: 30mm thickness ◊Output: 8-10 Tons per shift (8 hrs.) ◊The machine base is assembled and welded by high quality steel
Hydraulic Cutting Device	◊ Cutting way: Tracking (Flying). ◊ Oil pump station 1set. ◊ Motor power of Oil pump station: 7.5kw with cooling system ◊ Forced air cooling device available ◊Material of blade: CR12 with heat treatment HRC60-62
Electrical System	◊ Control system: HMI & PLC control panel. ◊ Power: 440V 50Hz (as per local requirement)
Run-out Table	◊ Frame: 8# steel groove welded ◊ Roller type. ◊ Quantity: 1 pc

main parameter

◊ Max Capacity: 5000kgs

◊ Inner diameter of coil: 400-600mm
◊ Manual with brake
Leveling Device
◊ Ensure the material level and straight
◊ The width can be adjusted
Main Forming System
◊ Width & Height & Thickness of sheet: According to Drawings
◊ Material: GI sheet coil or Colored sheet coil
◊ Motor Power: 5.5 kw forming system
◊ Roller material:Cr12
◊ Surface of Roller: Heat treatment HRC58-60
◊ Measuring accuracy: +/- 0.5 mm/M
◊ Safety Hood: Cage
◊Arch middle plate: 30mm thickness
◊Output: 8-10 Tons per shift (8 hrs.)
◊The machine base is assembled and welded by high quality steel
Hydraulic Cutting Device
◊ Cutting way: Tracking (Flying).
◊ Oil pump station 1set.
◊ Motor power of Oil pump station: 7.5kw with cooling system
◊ Forced air cooling device available
◊Material of blade: CR12 with heat treatment HRC60-62
Electrical System
◊ Control system: HMI & PLC control panel.
◊ Power: 440V 50Hz (as per local requirement)
Run-out Table
◊ Frame: 8# steel groove welded
◊ Roller type.
◊ Quantity: 1 pc

other products

Packaging Details --.

1.Tighten to container with steel wire rope and welded angel iron.

2.Main forming machine and unciler is naked (if you need we can also packed with water-proof plastic)

3 .Roll forming machine PLC control system and moter pump are packed with water-proof plastic coveragePortTianjinLead

Time :30 days after your pre-deposit

About us

Cangzhou Dixin Roll Forming Machine Co.,Ltd,Our company is the professional and leading manufacture,can manufacture ,design,installation and debug various roll forming machines and metal processing sheet equipments ,which produce metal roof wall panel,glazed roof tile , CZ steel purlin,floor desking,roof ridge cap,sandwich panel ,roof rtruss,shutter panel,shutter slat,door frame, guardrail ,and metal sheet uncoiler ,bending ,slitting,cutting,flattening,punching,crimpingl. especially can design machine according to customer's request.

1. Installation and training:

A.If buyers visit our factory and check the machine, we will teach you how to install and use the machine,

and also trainyour workers/technician face to face.

B.Without visiting, we will send you user manual and video to teach you to install and operate.

C.If buyer needs our technician to go to your local factory, please arrange board and lodging and

other necessary things.

2. after Service

A.One year guarantee for whole machine.

B.24 hours technical support by email or phone call.

C.If there is any problem found of the machine, we will repair it for free in one year.

If you want to get more information about our equipment ,

Please feel free contact Nancy

Tel:8615227219783

Wechat: DX15227219783

Whatsapp:15227219783

Contact us if you need more details on Ig Square Plate Equipment Roll. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Applied to Angle Forming of Steel、Plate Mental Forming Machine. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Door Frame Roll Forming Machine